Česky
DeutschSVR99 01L
AB CHIMIE: Silicone Removable Coating, packaging - 1L, Temperature range of – 65°C to + 150°C, SPQ-6x1L We sell only in the Czech and Slovak Republics.
Price (net of VAT) / L
90,2610 EUR
SVR99 is a silicone conformal coating designed to protect printed circuit boards exposed to high humidity environments. The coating is specially formulated to be easily removed with SND from ABchimie which is ideal.
SVR99 in bulk may be applied by spraying, dipping or brushing. Thinners (DVS) are available to maintain the viscosity of the coating. A UV trace is included within the coating to allow easy and reliable post-coating inspection. The stronger the reflected light, the thicker the coating layer.
Drying Times and Curing Conditions
SVR99 will dry in air within 4 to 12 hours at room temperature. This cure time can be reduced by the use of moderate heat. The coating should be tack free within 20 minutes. Any heat cure must be started after the coating has become tack free.
TYPICAL PROPERTIES
Liquid SVR99 (varnish)
Colour: Clear Translucent Fluid
Non-volatile Content: 36% approx.
Viscosity at 25°C : 140-180 cps
Specific Gravity @ 20°C: 0.95
Flash Point: 25°C
Drying Time: <15 min. touch dry
24 hours optimum properties
Cured SVR99 (coating)
Colour: Transparent (blue reflection)
Electrical Resistivity: 1 x 1014 Ohms/cm
Temperature Range: -50°C to +125°C
Dielectric Strength: 90 kV/mm
Résistance disolement (?) 1012 (MIL-I-46058C)
VRT -25°C +25°C, 100 cycles, palier 15min, 5°C/min
Thermal chocking -25°C +50°C, 50 cycles, 15min/15min
Diectric withstanding voltage > 1500V (MIL-I-46058C)
SIR test 15H 20°C-80°C, 90%RH, sous tension
Moisture resistance (déi water) 10-80°C, 95%RH +-4%, 90 days
Flammability: Self-extinguishing UL94VO
Facteur de dissipation (at 1MHz, 25°C) 0.01
SVR99 in bulk may be applied by spraying, dipping or brushing. Thinners (DVS) are available to maintain the viscosity of the coating. A UV trace is included within the coating to allow easy and reliable post-coating inspection. The stronger the reflected light, the thicker the coating layer.
Drying Times and Curing Conditions
SVR99 will dry in air within 4 to 12 hours at room temperature. This cure time can be reduced by the use of moderate heat. The coating should be tack free within 20 minutes. Any heat cure must be started after the coating has become tack free.
TYPICAL PROPERTIES
Liquid SVR99 (varnish)
Colour: Clear Translucent Fluid
Non-volatile Content: 36% approx.
Viscosity at 25°C : 140-180 cps
Specific Gravity @ 20°C: 0.95
Flash Point: 25°C
Drying Time: <15 min. touch dry
24 hours optimum properties
Cured SVR99 (coating)
Colour: Transparent (blue reflection)
Electrical Resistivity: 1 x 1014 Ohms/cm
Temperature Range: -50°C to +125°C
Dielectric Strength: 90 kV/mm
Résistance disolement (?) 1012 (MIL-I-46058C)
VRT -25°C +25°C, 100 cycles, palier 15min, 5°C/min
Thermal chocking -25°C +50°C, 50 cycles, 15min/15min
Diectric withstanding voltage > 1500V (MIL-I-46058C)
SIR test 15H 20°C-80°C, 90%RH, sous tension
Moisture resistance (déi water) 10-80°C, 95%RH +-4%, 90 days
Flammability: Self-extinguishing UL94VO
Facteur de dissipation (at 1MHz, 25°C) 0.01
| Store name | Availability | Of which reserved | Price (net of VAT) | |
|---|---|---|---|---|
| ATD hlavní sklad | 0 | 0 | 90,2610 EUR | |
| ATD - sklad vzorky | 0 | 0 | EUR |